Articulated Flange with Pin 90 Degrees 25 x 25 mm Square Tube Connector

Articulated Flange with 2 Flange Plates for Flexible Angle Connections

The articulated flange with 2 flange plates is a flexible connection solution for the ALUSTECK® 25x25mm aluminum square tube plug-in system. In contrast to the articulated flange with a pin, this version does not have a profile plugged onto it. Instead, the connector has two flange plates, which are connected by an articulation and can be screwed directly onto profiles, panels, walls, or other suitable surfaces.

This makes this articulated flange particularly suitable for constructions where two components are to be connected at a variable angle. Typical applications include roof overhangs, slanted roof connections, foldable or adjustable elements, slanted supports, brackets, wall connections, and individual special constructions.

• Articulated flange with 2 flange plates
• Flexible angle connection without a pin
• Ideal for screwing profile to profile
• Also suitable for wall, ceiling, floor, or panel mounting
• Optimal for roof overhangs, roof connections, and slanted constructions
• Suitable for indoor and outdoor use
• Compatible with constructions using the ALUSTECK® 25x25mm aluminum square tube plug-in system

Suitable for flexible angle connections, roof overhangs, and individual constructions.
Can be used for indoor and outdoor areas.

Flexible Connection with 2 Flange Plates

The articulated flange with 2 flange plates enables a movable connection between two fastening points. Both sides of the connector can be screwed. This allows profiles or components to be flexibly connected to each other, even if they are not at right angles to each other.

The integrated articulation allows for variable alignment of the two flange sides. This way, inclinations, roof slopes, or individual angles can be easily compensated. Especially for roof overhangs, slanted frame constructions, or connections between walls and profiles, this connector offers a practical and clean mounting solution.

Ideal for Roof Overhangs and Slanted Connections

One of the most important applications of the articulated flange with 2 flange plates is the fastening of roof overhangs. The connector can be used, for example, to flexibly attach a slanted roof strut, a roof support, or an outrigger to an existing construction.

Especially for canopies, lean-to roofs, small protective roofs, greenhouse constructions, or patio solutions, profiles often need to be mounted at a specific angle. With the articulated flange, such angles can be flexibly adjusted and the components then screwed into place.

This makes the connector particularly suitable for:

• Roof overhangs
• Lean-to roofs
• Protective roofs
• Patio canopies
• Balcony canopies
• Greenhouse roofs
• Cold frame covers
• Carport extensions
• Slanted roof connections
• Wall connections with a slope

Typical Applications of the Articulated Flange with 2 Flange Plates

The articulated flange with 2 flange plates is versatile and particularly suitable for constructions where a flexible, screwable angle connection is required.

• Roof overhangs and canopies
• Canopies for garden, patio, or balcony
• Lean-to roof constructions made of aluminum square tubes
• Slanted roof shelves and slanted shelving constructions
• Slanted support struts and outriggers
• Wall connections for profiles
• Ceiling connections with variable angles
• Floor fastenings for slanted supports
• Profile-to-profile connections
• Panel-to-profile connections
• Foldable or movable construction elements
• Supports for light frame constructions
• Reinforcements on existing constructions
• Slanted brackets and fastening points
• Shelves under roof slopes
• Workshop and storage constructions
• Outdoor kitchens and substructures
• Protective frames, covers, and claddings
• Machine frames and enclosures
• Exhibition stand construction and presentation systems
• DIY projects, furniture construction, and special constructions

Articulated Flange with 2 Flange Plates for Profile-to-Profile Connections

The articulated flange can be screwed directly onto an aluminum square tube. This allows two profiles to be connected at a freely selectable angle. This is particularly practical when a rigid 90° connection is not possible or not desired.

Examples of profile-to-profile connections:

• Connection between roof strut and frame construction
• Slanted support between two profiles
• Side outrigger for light canopies
• Adjustable connection for special constructions
• Angle connection for non-right-angled frames

Articulated Flange for Wall, Floor, and Ceiling Mounting

Thanks to the two flange plates, the connector can be attached not only to profiles but also to other suitable surfaces. Depending on the application, screwing onto wood, panel material, walls, ceilings, or floor surfaces is possible.

This makes the articulated flange suitable, for example, for slanted wall connections, light roof supports, foldable elements, or constructions where a profile is to be flexibly attached to a fixed surface.

Typical applications:

• Wall connection for slanted struts
• Floor fastening for inclined supports
• Ceiling fastening with variable angle
• Fastening on wooden panels or frames
• Mounting on existing constructions
• Connection of profiles to fixed components

More Flexibility for Slanted Constructions

With the articulated flange with 2 flange plates, constructions can be realized where the angle needs to be adjusted on site. This is particularly helpful when profiles need to be adapted to an existing roof pitch, a wall, a slope, or an existing construction.

Instead of using fixed angle connectors or elaborately adapted special parts, the articulated flange can be flexibly aligned and then screwed into place. This creates a simple, practical, and versatile connection solution for many applications in private, commercial, and industrial areas.

Advantages of the Articulated Flange with 2 Flange Plates

• Flexible angle adjustment through integrated articulation
• Two-sided screwing thanks to 2 flange plates
• No pin required
• Ideal for roof overhangs and slanted roof connections
• Very well suited for profile-to-profile connections
• Also usable for wall, floor, ceiling, and panel mounting
• Enables flexible connections to existing constructions
• Compensation of inclinations and individual angles possible
• Practical for subsequent extensions and special solutions
• Suitable for constructions with ALUSTECK® aluminum profiles

Difference to the Articulated Flange with Pin

With the articulated flange with pin, a 25x25mm square tube is plugged onto the pin. This variant is particularly suitable when a strut is to be directly received over the tube end.

The articulated flange with 2 flange plates, on the other hand, has no pin. Both sides are screwed. This makes this version particularly suitable when two surfaces, two profiles, or a profile and a fixed surface are to be flexibly connected to each other.

• Articulated flange with pin: for inserting into a tube end
• Articulated flange with 2 flange plates: for two-sided screwing without a plug-in pin

Buy Articulated Flange with 2 Flange Plates Online - Technical Data

Item Details

Material: Plastic (PA), glass fiber reinforced
Color: grey (R7035) / black
Version: Articulated flange with 2 flange plates
System: Suitable for constructions with the 25x25mm aluminum square tube plug-in system from ALUSTECK®
Mounting: Two-sided screwing onto profiles, panels, or suitable surfaces
Applications: Roof overhangs, roof connections, profile-to-profile connections, wall connections, slanted supports, outriggers, cross bracing, and individual special constructions

Note: The load capacity depends on the respective construction, the set angle, the screwing, the surface, the direction of load, and the profile structure used.

Europe-wide shipping at fair prices! Also available in large quantities upon request.

Item Accessories: Self-tapping screw 3.9 x 19 mm Phillips countersunk head