The ALUSTECK® profiles are rustproof, lightweight and yet extremely load-bearing. In addition, the modular system allows for easy extension or adaptation to individual needs.
Build Aquarium Rack: ALUSTECK® Substructures for Aquarium Construction
Your project.
Planned in 3D.
Build your aluminium frame virtually. Adapt profiles and connectors to your project and keep an eye on the parts list.
Open the 3D kit
- Online shop
- 3D Construction Kit
- Industry & Crafts
- Kits
- Build it yourself
- Blueprints
- Guide
- Configurators
Aquarium stand as a base frame for DIY construction made of silver anodized aluminum profiles and connectors (plastic-coated) with a steel core in the example dimensions W=1,500 x D=500 H=700 mm for an aquarium or terrarium.
Load capacity & carrying capacity: The load capacity of the ALUSTECK® professional system for frames made of aluminum square tubes is extraordinarily high and is therefore also used in professional aquarium construction by our commercial customers. Large aquarium tank stands as well as complete aquarium sales systems are based on our system! The example aquarium stand has 3 subdivisions that ensure the enormous load-bearing capacity of the stand.
Up to 30%
discountProfessional
qualityModular system
lightweight aluminiumCutting
to sizePersonal
contactAffordable &
secure shipping
Products for building an aquarium stand
Easily configure materials for your kit online!
Step 1: Aquarium Stand Planning - Determine Dimensions of the Base Body:
Step 2: Calculate the cut lengths of the aluminum profiles for the base frame:
A) Determine cut lengths for the frame width:
In our example, there are 4 connectors on the width dimension. From the total width (1,500 mm), 4 x 25 mm (corner connector visible surfaces) must now be subtracted. In our case, you divide the result by 3, as we have 3 compartments across our total width.
Aluminum profile cut length calculation for the width with 3 compartments:
1,500 mm - (4 x 25 mm) : 3=467 mm
B) Determine cut lengths for the frame height:
On the height axis of our aquarium frame, there are two 25 x 25 mm connectors. From the total height (700 mm), we must now subtract 2 x 25 mm to arrive at our desired cut length.
Aluminum profile cut length calculation for the height:
700 mm - (2 x 25 mm)=650 mm
C) Determine cut lengths for the frame depth:
To determine the correct cut length of the aluminum profiles for the depth of our aquarium base frame, we look at the side view from sketch 2. Here too, there are two 25 x 25 mm connectors. From the total depth (500 mm), we must also subtract 2 x 25 mm here.
Aluminum profile cut length calculation for the depth:
500 mm - (2 x 25 mm)=450 mm
Step 3: Build your own aquarium frame - Material and Bill of Materials:
The materials from our range
Bill of Materials for the construction of this project
Required parts list / materials for the aquarium stand
ALUSTECK® profiles
Item | Name | Variant | Item no. | Quantity |
1 | Aluminum profile without web 25 x 25 mm square tube | Length: 467 mm, Cutting diagram: A | R-V25-SI | 6 |
2 | Aluminum profile without web 25 x 25 mm | Length: 650 mm, Cutting diagram: A | R-V25-SI | 2 |
3 | Aluminum profile without web 25 x 25 mm | Length: 450 mm, Cutting diagram: A | R-V25-SI | 4 |
4 | Aluminum profile 1 double web 10 mm 25 x 25 mm | Length: 467 mm, Cutting diagram: B | R-DST-SI | 6 |
5 | Aluminum profile 1 double web 10 mm 25 x 25 mm | Length: 650 mm, Cutting diagram: B | R-DST-SI | 2 |
6 | Aluminum profile 1 double web 10 mm 25 x 25 mm | Length: 450 mm, Cutting diagram: B | R-DST-SI | 4 |
7 | Aluminum profile 2 double webs 10 mm inside angle 25 x 25 mm | Length: 650 mm, Cutting diagram: C | R-2DST-SI | 2 |
8 | Aluminum profile 2 double webs 10 mm opposite 25 x 25 mm | Length: 650 mm, Cutting diagram: C | R-2DST-LR-SI | 2 |
ALUSTECK® connectors
Item | Name | Variant | Item no. | Quantity |
9 | Right angle 1 outlet | grey, with steel core | 3D3V25KS-RAL7035 | 8 |
10 | T-connector 1 outlet | grey, with steel core | 3D4V25KS-RAL7035 | 8 |
External accessories from DIY / specialist stores
Item | Name | Variant | Quantity |
11 | Panel sides left + right | 9 mm thick / cut size: 649 x 449 mm (incl. – 1 mm tolerance) | 2 |
12 | Panel rear side | 9 mm thick / cut size: 649 x 466 mm (incl. – 1 mm tolerance) | 3 |
Panel Dimension Tip: To avoid an overly tight construction for the panels, it is advisable to reduce the actual base dimension by 1 mm on each axis!
Note: This aquarium stand is just an example construction for DIY. The use of our aluminum plug-in system is versatile and, among many other applications, also ideally suited for the construction of individual terrariums, large terrarium walls, substructures of all kinds, as well as for the construction of aquarium breeding or aquarium sales systems!
How individually our customers build:
FAQ: Building an aquarium stand
Depending on the desired look and stability, you can use wood, glass or plastic panels. It is important that the materials are moisture-resistant and have sufficient load-bearing capacity.
No, the system is designed so that you can assemble it with simple tools such as a rubber mallet. This makes assembly particularly user-friendly and quick to complete.
Yes, aluminium is rustproof and resistant to salt water. This makes it ideally suited to both freshwater and marine aquariums alike.
Yes, many aquarists use wooden or plastic cladding to visually match the stand to the room. Ventilation openings for filters and cables should be factored in as well.
In theory there are no limits, as long as the construction is reinforced accordingly. Cross braces and additional connecting elements provide extra stability for very large frames.
Yes, the ALUSTECK® plug-in system allows for later extension by adding additional profiles or reinforcements. This lets you flexibly adapt it to new requirements.

















